Solenoid lock

Specifications for general configuration:

• Size: 73*58*13mm . color: Black
• Working method: independent function (lock when power off, unlock immediately when power on).
• Mechanical lifespan: over 500,000 times.
• Electromagnet lifespan: over 1,000,000 times under rating conditions.
• Unlock test: Build-in test.
• Material: SPCC cold rolled sheet
• Surface : Electroplating paint (Neutral Salt spray test time: over 48 hours)
• Security: The latch can withstand 150kg of tension without obvious permanent deformation, with shockproof and anti-pry function.
• Environment temperature: over 60 degrees to 10 degrees below zero.
• Installation: Reserved mechanical emergency unlock position.

Packing & Shipping​

• Unit weight: 151g
• Packing case: 100pcs
• Gross weight: 18KG
• Carton size:
• 36*33*13cm / 0.015m³
• Latch weight: 10.8g
• Send by DHL,UPS,FedEX

Solenoid Lock Test

We have conducted tests on the electromagnetic locks covering various parameters such as salt solution concentration, pH value, test temperature, salt spray deposition rate, and test duration. A 5% ±1% sodium chloride solution was used, with a pH value between 6.5 and 7.2 (neutral salt spray test). The temperature was maintained at 35℃ ±2℃, and the salt spray deposition rate was 1–2 mL/80cm²·h. The test duration may range from a few hours to several thousand hours, depending on the actual application scenario and corrosion resistance requirements of the electromagnetic lock.